DocumentCode :
2596021
Title :
A reconfigurable beam shape patch array antenna (RBS-PA) for WiMAX and WiFi applications
Author :
Jusoh, M. ; Faizal, M. ; Malek, M.F. ; Kamarudin, M.R. ; Hamid, M.R.
Author_Institution :
Sch. of Comput. & Commun. Eng., Univ. Malaysia Perlis (UniMAP), Pauh Putra, Malaysia
fYear :
2012
fDate :
21-24 May 2012
Firstpage :
237
Lastpage :
240
Abstract :
A reconfigurable beam shape patch antenna (RBS-PA) is proposed in this paper. The RBS-PA antenna which consists of two rectangular elements is fed by a 50Ω microstrip feed line. A feed network technique is implementing to combine both radiating elements. The PIN diode switch is positioned at the transmission line at the ideal location. The activation of certain PIN diode switches configuration would then determine the beam shape angle and main lobe magnitude (dB). The RBS-PA is capable of shaped its radiated beam to 9.9dB and 6.7dB. All design and simulations have been carried out using CST Microwave Studio. This antenna is a promising candidate to be installed for a WiFi and WiMAX smart antenna system.
Keywords :
UHF antennas; UHF diodes; antenna feeds; antenna radiation patterns; high-frequency transmission lines; microstrip antenna arrays; microstrip lines; p-i-n diodes; CST Microwave Studio; PIN diode switch; RBS-PA antenna; WiFi smart antenna system; WiMAX smart antenna system; beam shape angle; feed network technique; main lobe magnitude; microstrip feed line; radiating elements; reconfigurable beam shape patch array antenna; rectangular elements; resistance 50 ohm; transmission line; Feeds; Gain; IEEE 802.11 Standards; Microwave communication; Switches;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electromagnetic Compatibility (APEMC), 2012 Asia-Pacific Symposium on
Conference_Location :
Singapore
Print_ISBN :
978-1-4577-1557-0
Electronic_ISBN :
978-1-4577-1558-7
Type :
conf
DOI :
10.1109/APEMC.2012.6237996
Filename :
6237996
Link To Document :
بازگشت