• DocumentCode
    2600932
  • Title

    A new sensorless thrust control of linear induction motor

  • Author

    Ryu, Hyung-Min ; Ha, Jung-Ik ; Sul, Seung-Ki

  • Author_Institution
    Dept. of Electr. Eng., Seoul Nat. Univ., South Korea
  • Volume
    3
  • fYear
    2000
  • fDate
    2000
  • Firstpage
    1655
  • Abstract
    This paper presents the field-oriented thrust control of a linear induction motor without flux or speed sensor. The induction motor is structurally symmetrical but it has the difference of the reluctances between the flux axis and the quadrature axis due to the main flux saturation. This electrical saliency can be utilized to estimate an instantaneous flux angle by high frequency signal injection. In the case of a rotary induction motor, it has been verified that this high frequency signal injection method gives reasonable torque controllability at zero or low stator frequency even under a heavily loaded condition. In this paper, it is shown that the electrical saliency also exists in the linear induction motor and the comparison with the rotary induction motor is described. From this result, the sensorless field-oriented thrust control of a linear induction motor in low operating frequency region is presented and the sensorless control in the overall frequency range is implemented by the combination with an adaptive observer
  • Keywords
    controllability; linear induction motors; machine vector control; magnetic flux; mechanical variables control; observers; stators; torque control; adaptive observer; electrical saliency; field-oriented thrust control; flux axis; heavily loaded condition; high frequency signal injection method; instantaneous flux angle; linear induction motor; low operating frequency region; low stator frequency; main flux saturation; quadrature axis; rotary induction motor; sensorless field-oriented thrust control; sensorless thrust control; structurally symmetrical motor; torque controllability; zero stator frequency; Adaptive control; Controllability; Frequency estimation; Impedance; Induction motors; Mechanical sensors; Programmable control; Sensor phenomena and characterization; Sensorless control; Stators;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Industry Applications Conference, 2000. Conference Record of the 2000 IEEE
  • Conference_Location
    Rome
  • ISSN
    0197-2618
  • Print_ISBN
    0-7803-6401-5
  • Type

    conf

  • DOI
    10.1109/IAS.2000.882103
  • Filename
    882103