DocumentCode
2623874
Title
Optimization of Ageing Regime for 6063 Aluminium Alloys
Author
Xiurong, Zuo ; Yuanwei, Jing
Author_Institution
Sch. of Phys. Sci. & Eng., Zhengzhou Univ., Zhengzhou, China
Volume
2
fYear
2011
fDate
6-7 Jan. 2011
Firstpage
811
Lastpage
814
Abstract
The optimum ageing process parameters for 6063 aluminium alloys were obtained with the aids of orthogonal polynomial regression analysis and optimization methods. The regression equation between ageing hardness and ageing temperature and time was obtained. The optimum solution of the regression equation was found with optimization method. The optimum hardness of 76.6HV was obtained adopting two staged ageing technique at 170°C for 70min plus 210°C for 50min. Two-staged ageing regime has an obvious advantage over traditional one-staged ageing regime. Higher ageing hardness has been obtained during shorter ageing time.
Keywords
ageing; aluminium alloys; hardness; optimisation; polynomials; regression analysis; 6063 aluminium alloys; AlJkJk; ageing hardness; ageing regime; optimization method; orthogonal polynomial regression analysis; temperature 170 degC; temperature 210 degC; time 50 min; time 70 min; Automation; Mechatronics; 6063 Aluminium Alloys; Ageing; Optimization Method;
fLanguage
English
Publisher
ieee
Conference_Titel
Measuring Technology and Mechatronics Automation (ICMTMA), 2011 Third International Conference on
Conference_Location
Shangshai
Print_ISBN
978-1-4244-9010-3
Type
conf
DOI
10.1109/ICMTMA.2011.486
Filename
5721312
Link To Document