DocumentCode :
2630342
Title :
Surface flashover of alumina insulators in vacuum under impulse voltage (the influence of additives)
Author :
Ding, Lijian ; Li, C.R. ; Wang, Wei ; Wang, Jingchun
Author_Institution :
Dept. of Electr. Eng., North China Electr. Power Univ., Beijing, China
Volume :
2
fYear :
2000
fDate :
15-18 Oct. 2000
Firstpage :
812
Abstract :
This paper investigates flashover performance of alumina insulators prepared with different additives in vacuum under an impulse voltage. The four kinds of alumina insulator studied are prepared under the same sintering conditions with different additives. The surface flashover performance of these samples is tested in vacuum. The microstructure of the alumina samples is also observed using scanning electron microscopy (SEM). Based on the experimental results, the characteristics of flashover are different from the test samples. The analysis shows that the influence of additives may be attributed to the change of microstructure.
Keywords :
alumina; ceramic insulators; flashover; impulse testing; insulator testing; scanning electron microscopy; sintering; surface discharges; Al2O3; Al2O3-Nb2O5; Al2O3-SnO2; Al2O3-TiO2; Al2O3-ZnO; SEM; additives; alumina insulators; flashover performance; impulse voltage; microstructure; sintering conditions; surface flashover; vacuum; Additives; Circuit testing; Electrodes; Flashover; Inorganic materials; Insulation; Microstructure; Scanning electron microscopy; Vacuum systems; Voltage;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electrical Insulation and Dielectric Phenomena, 2000 Annual Report Conference on
Print_ISBN :
0-7803-6413-9
Type :
conf
DOI :
10.1109/CEIDP.2000.884082
Filename :
884082
Link To Document :
بازگشت