DocumentCode :
2639157
Title :
Design and Performance of a Broadband MIC Low Noise K-Band Balanced Mixer, Polar Discriminator and Related Components
Author :
Gorwara, Ashok K. ; Chambers, Donald R. ; Gysel, Ulrich ; Parker, Don
Author_Institution :
Stanford Res. Inst., Menlo Park, CA, USA
fYear :
1975
fDate :
12-14 May 1975
Firstpage :
140
Lastpage :
142
Abstract :
The design and experimental performance of a broadband (18-26.5 GHz) single balanced mixer, polar discriminator and related components fabricated in microstrip on 0.010-inch thick gold plated sapphire is described. Typical conversion loss of 7.5 dB with a maximum of 8.5 dB at the top of the band was achieved in the mixer. The output polar angle of the discriminator is linear within ±15° with an input signal level of -14 dBm. Full utilization of planar techniques is made that could also be applicable for frequencies up to and above 60 GHz.
Keywords :
microwave integrated circuits; mixers (circuits); broadband MIC low noise k-band balanced mixer; conversion loss; frequency 18 GHz to 26.5 GHz; gold plated sapphire; loss 7.5 dB; loss 8.5 dB; polar discriminator; single balanced mixer; size 0.1 inch; Circuit testing; Dielectric substrates; Frequency measurement; K-band; Microstrip; Microwave integrated circuits; Millimeter wave measurements; Noise figure; Radio frequency; Schottky diodes;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Microwave Symposium, 1975 IEEE-MTT-S International
Conference_Location :
Palo Alton, CA
Type :
conf
DOI :
10.1109/MWSYM.1975.1123310
Filename :
1123310
Link To Document :
بازگشت