DocumentCode :
2643639
Title :
Design, fabricate and testing of feed network for 2X2 array antenna
Author :
Shah, M. S R Mohd ; Abu, Maisarah ; Abdul Aziz, M. Z A
Author_Institution :
Fac. of Electron. & Comput. Eng., Univ. Teknikal Malaysia Melaka, Ayer Keroh
fYear :
2007
fDate :
4-6 Dec. 2007
Firstpage :
1
Lastpage :
5
Abstract :
This project describe the design, fabricate and testing of feed network for 2times2 array antenna. This feed network was designed using Microwave Office 2004 with applied Wilkinson power divider to develop the design. The circuit was fabricated on a microstrip substrate with a dielectric constant epsivr =4.7, tan sigma =0.019 and thickness =1.6 mm. The project that had developed can support at IMT (International Mobile Telecommunication) 2000 band which is operating at frequency of 1.8 GHz to 2.2 GHz with mobile station transmitting and it applied to many microwave and millimeter-wave systems and devices such as antenna feeders, power amplifiers, etc.
Keywords :
UHF antennas; antenna arrays; antenna feeds; antenna testing; Microwave Office 2004; Wilkinson power divider; array antenna; feed network design; feed network fabrication; feed network testing; frequency 1.8 GHz to 2.2 GHz; microwave systems; millimeter-wave systems; Antenna arrays; Antenna feeds; Circuit testing; Dielectric constant; Dielectric substrates; Frequency; Microstrip antenna arrays; Microwave devices; Millimeter wave communication; Power dividers; Feed network; Microwave Office; Wilkinson power divider; array antenna; microstrip;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Applied Electromagnetics, 2007. APACE 2007. Asia-Pacific Conference on
Conference_Location :
Melaka
Print_ISBN :
978-1-4244-1434-5
Electronic_ISBN :
978-1-4244-1435-2
Type :
conf
DOI :
10.1109/APACE.2007.4603942
Filename :
4603942
Link To Document :
بازگشت