DocumentCode
2651424
Title
A 2D broadband, printed Luneburg lens antenna
Author
Pfeiffer, Carl ; Grbic, Anthony
Author_Institution
Dept. of Electr. Eng. & Comput. Sci., Univ. of Michigan, Ann Arbor, MI, USA
fYear
2009
fDate
1-5 June 2009
Firstpage
1
Lastpage
4
Abstract
This paper details the design of a printed-circuit-board implementation of a 2D Luneburg lens. The refractive index of the lens is controlled through a combination of meandering crossed microstrip lines and varying their widths. The 12.4lambdao diameter lens is designed to operate in the Transverse Electromagnetic (TEM) mode at 13 GHz. The lens was designed, fabricated, and measured. The measured half power beamwidth of the experimental lens is 5.26deg.
Keywords
broadband antennas; lens antennas; microstrip antennas; microstrip lines; printed circuits; refractive index; 2D broadband antenna; frequency 13 GHz; microstrip lines; printed Luneburg lens antenna; printed circuit board; refractive index; transverse electromagnetic mode; Antenna measurements; Broadband antennas; Dielectrics; Electromagnetic measurements; Lenses; Microstrip; Optical design; Permittivity; Refractive index; Transmission line theory;
fLanguage
English
Publisher
ieee
Conference_Titel
Antennas and Propagation Society International Symposium, 2009. APSURSI '09. IEEE
Conference_Location
Charleston, SC
ISSN
1522-3965
Print_ISBN
978-1-4244-3647-7
Type
conf
DOI
10.1109/APS.2009.5171945
Filename
5171945
Link To Document