A study on design and fabrication of UHF band RFID antenna

Author

Lee, Eun-kyu ; Choi, Hyung-Rim

Author_Institution

Intell. Container R&D Center, Dong-A Univ., Busan, South Korea

fYear

2009

fDate

1-5 June 2009

Firstpage

1

Lastpage

4

Abstract

In this study, the research on antenna designing method and overall process were performed in order to apply the RFID tag used at UHF band. Also, the chip impedance measured and antenna impedance had been examined for impedance matching. Through the simulation, the radiation pattern can come out as Omni-directional form at the RFID tag with Au wire bonding between the antenna and the chip. As the result of this study, we have performed evaluation and measurements that examined the overall manufacturing conditions in order to obtain tag designing method and the manufacturing process.

Keywords

UHF antennas; antenna radiation patterns; gold; impedance matching; manufacturing processes; radiofrequency identification; Au; UHF band RFID tag antenna; antenna design; antenna fabrication; antenna impedance; chip impedance; impedance matching; manufacturing process; omnidirectional antenna; radiation pattern; wire bonding; Antenna measurements; Design methodology; Fabrication; Impedance measurement; Manufacturing processes; RFID tags; Radiofrequency identification; Semiconductor device measurement; UHF antennas; UHF measurements;

fLanguage

English

Publisher

ieee

Conference_Titel

Antennas and Propagation Society International Symposium, 2009. APSURSI '09. IEEE

Conference_Location

Charleston, SC

ISSN

1522-3965

Print_ISBN

978-1-4244-3647-7

Type

conf

DOI

10.1109/APS.2009.5172017

Filename

5172017