Bi-objective sizing optimization of a PM machine drive on an operating profile

Author

Aubry, J. ; Ben Ahmed, H. ; Multon, B.

Author_Institution

SATIE, UEB, Bruz, France

fYear

2010

fDate

6-8 Sept. 2010

Firstpage

1

Lastpage

7

Abstract

This article sets forth a design optimization methodology for an SMPM machine drive on an operating profile. The optimization parameters serve to describe both the machine geometry and electrical ratings of the electronic power converter. Each operating point is treated independently, and current control is optimized at every operating point in order to not only minimize machine drive losses but also satisfy a number of constraints. This optimization methodology will then be applied to the design of a direct-drive conversion chain for a wave energy converter (WEC).

Keywords

drives; optimisation; permanent magnet machines; power convertors; PM machine drive; bi-objective sizing optimization; current control; electronic power converter; machine geometry; wave energy converter; Biological system modeling; Converters; Copper; Insulated gate bipolar transistors; Optimization; Resistance; Torque; Bi-objective optimization; design methodology; direct-drive; operating profiles; optimization methods; particle swarm; permanent-magnet generators; sizing optimization; wave energy conversion;

fLanguage

English

Publisher

ieee

Conference_Titel

Electrical Machines (ICEM), 2010 XIX International Conference on

Conference_Location

Rome

Print_ISBN

978-1-4244-4174-7

Electronic_ISBN

978-1-4244-4175-4

Type

conf

DOI

10.1109/ICELMACH.2010.5608308

Filename

5608308