Title :
Notice of Retraction
Displacement calculation method of 0° and 90° winding angle circular and noncircular cross-section beam under tensile and bending loads
Author :
Sun Jiang ; Xiao Qi
Author_Institution :
Dept. of Mech. & Electr. Eng., Jiaxing Univ., Jiaxing, China
Abstract :
Notice of Retraction
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
The paper presents a calculation method for displacements of 0° and 90° winding angle circular and noncircular cross-section beam under tensile and bending loads. The method is dividing a beam into finite beam elements, analyzing the displacements, strains and stresses of the beam elements, through the transformation of coordinates, integrating displacements and loads of the beam elements on the beam and obtaining the displacements of the beam under tensile and bending loads. Comparisons between theoretical results and numerical results have been done and they have a good agreement. The results show that the presented method can be used for calculating the displacements of 0° and 90° winding angle circular and non-circular cross-section beam under tensile and bending loads.
Keywords :
beams (structures); bending strength; finite element analysis; stress-strain relations; tensile strength; bending loads; displacement calculation method; finite beam element model; strain-stress elements; tensile loads; winding angle noncircular crosssection beam; Aerospace industry; Chemical industry; Composite materials; Glass industry; Gyrators; Manufacturing industries; Mechanical factors; Shipbuilding industry; Tensile stress; Wounds; circular and noncircular cross-section beam; composite; displacement; filament winding; tensile and bending loads;
Conference_Titel :
Computer Engineering and Technology (ICCET), 2010 2nd International Conference on
Conference_Location :
Chengdu
Print_ISBN :
978-1-4244-6347-3
DOI :
10.1109/ICCET.2010.5486195
