A Design Method of Reconfigurable Controller for AC Position Servo Systems

Author

Qinmu, Wu ; Yi, Qin ; Yesong, Li

Author_Institution

Dept. of Control Sci. & Eng., Huazhong Univ. of Sci. & Technol., Wuhan

Volume

3

fYear

2006

fDate

14-16 Aug. 2006

Firstpage

1

Lastpage

5

Abstract

Aiming at a wide application range of controller, a design method of reconfigurable controller was presented for AC position servo systems (ACPSS) based on permanent magnet synchronous motor (PMSM). In this controller, each of control loops adopts several control strategies. Their characteristics and parameter´s calculation methods were analyzed in detail in this paper. The closed-loop bandwidth´s range of each control loop, anti-disturbance ability and precision of position servo in ACPSS were also analyzed, and a classification table about them has been obtained. On the base of these analyses, a method that regroups control strategies to form new controller was proposed. Some simulation results show that the application range of this controller is wider than that of conventional controller

Keywords

machine control; permanent magnet motors; servomotors; synchronous motors; AC position servo systems; ACPSS; PMSM; control loops; permanent magnet synchronous motor; reconfigurable controller design; Control systems; Design methodology; Feeds; Magnetic analysis; Pi control; Proportional control; Servomechanisms; Stators; Torque control; Velocity control; AC position servo systems; PMSM; Parameter calculation; Reconfigurable controlle; Strategy selection;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Electronics and Motion Control Conference, 2006. IPEMC 2006. CES/IEEE 5th International

Conference_Location

Shanghai

Print_ISBN

1-4244-0448-7

Type

conf

DOI

10.1109/IPEMC.2006.4778315

Filename

4778315