DocumentCode
2683432
Title
Notice of Retraction
The development of testing device for cross magnetic gear transmission performance
Author
Wang Zhi-ming ; Sun Tao ; Zhu Chong-hui ; Tang Dong-mei
Author_Institution
Sch. of Mechatron. Eng. & Autom., Shanghai Univ., Shanghai, China
Volume
4
fYear
2010
fDate
24-26 Aug. 2010
Firstpage
106
Lastpage
109
Abstract
Notice of Retraction
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
In order to test the transmission performance of cross magnetic gear which used to the production line for flat, the test system is set up. Transmission performance in different materials, spaces, pole numbers and loads are studied. First, after analyzing the traditional test system, according to the testing requirements, the overall test system is established. The installation of the transmission components and sensor in test system are determined. And then transmission, data acquisition systems and analysis software are designed. Finally, in order to verify the performance of testing system, experiments under same loads and different spaces to compare the transmission torque are done. The results showed that the system met the requirements of testing reliable, high precision, strong anti-interference for the 42mm diameter of NdFeB magnetic gear during the process of 1:1 cross magnetic gear transmission testing. The torque testing accuracy is up to 0.01Nm and the relative error can be controlled within 0.82%.
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
In order to test the transmission performance of cross magnetic gear which used to the production line for flat, the test system is set up. Transmission performance in different materials, spaces, pole numbers and loads are studied. First, after analyzing the traditional test system, according to the testing requirements, the overall test system is established. The installation of the transmission components and sensor in test system are determined. And then transmission, data acquisition systems and analysis software are designed. Finally, in order to verify the performance of testing system, experiments under same loads and different spaces to compare the transmission torque are done. The results showed that the system met the requirements of testing reliable, high precision, strong anti-interference for the 42mm diameter of NdFeB magnetic gear during the process of 1:1 cross magnetic gear transmission testing. The torque testing accuracy is up to 0.01Nm and the relative error can be controlled within 0.82%.
Keywords
data acquisition; data analysis; design engineering; gears; mechanical engineering computing; mechanical testing; sensors; torque; NdFeB; cross magnetic gear transmission performance; data acquisition system; data analysis software; magnetic gear transmission testing; size 42 mm; testing device; torque testing; transmission sensor; Magnetic analysis; Magnetic devices; Manganese; Software; magnetic gear; spatial cross-axis; test system; transmission performance;
fLanguage
English
Publisher
ieee
Conference_Titel
Computer, Mechatronics, Control and Electronic Engineering (CMCE), 2010 International Conference on
Conference_Location
Changchun
Print_ISBN
978-1-4244-7957-3
Type
conf
DOI
10.1109/CMCE.2010.5610222
Filename
5610222
Link To Document