A ferroelectric DRAM cell for high density NVRAMs

The operation of a ferroelectric memory cell for nonvolatile random access memory (NVRAM) applications is described. Because ferroelectric polarization reversal only occurs during store/recall but not DRAM read/write, ferroelectric fatigue is not a serious endurance problem. In the worst case, the effective silicon dioxide thickness of the unoptimized film studied here is less than 15 Å. The resistivity and endurance properties of the ferroelectric films can be optimized by modifying the composition of the film. This cell can be the basis of a very high density nonvolatile RAM with practically no read/write cycle limit and at least 10¹⁰ nonvolatile store/recall cycles