Development of Surface Myoelectric Sensor for Myoelectric Hand Prosthesis

This paper proposes a compact-sized surface myoelectric sensor for myoelectric hand prosthesis. To fit the surface myoelectric sensor in the socket of the myoelectric hand prosthesis, the sensor should be a compact size. The surface myoelectric sensor is composed of a skin interface and a single processing circuit that are mounted on a single package. Since the skin interface has one reference and two input electrodes, and the reference electrode is located in the middle of two input electrodes, we propose two types of sensors with the circle- and bar-shaped reference electrode, but all input electrodes are the bar-shaped. The metal material used for the electrodes is the stainless steel (SUS440) that endures sweat and wet conditions. The inter-electrode distance (IED) between two input electrodes is selected as 18 mm, 20 mm, and 22 mm taking into consideration conduction velocity and median frequency of the myoelectric signal. The signal processing circuit consists of a differential amplifier with band pass filter, a band rejection filter for rejecting 60 Hz power-line noise, amplifiers, and a mean absolute value circuit. The proposed sensor from the output characteristics is evaluated according to the IED and the shape of the reference electrode. The experimental results are shown that the surface myoelectric sensor with the 18 mm IED and the bar-shaped reference electrode is suitable for the myoelectric hand prosthesis