A 6.5 GHz monolithic CMOS voltage-controlled oscillator

Phase noise and frequency tuning range are key performance parameters of high-frequency voltage-controlled oscillators (VCOs). To achieve low phase noise, LC sinusoidal oscillators with high quality factor (Q) are preferred to other topologies, such as inverter-based ring oscillators. The frequency tuning of LC oscillators can be readily achieved with varactor diodes either on-chip or external. The frequency tuning range is often limited by low supply voltage and maximum variable capacitance available to varactors at high frequencies when on-chip inductors are used. Other frequency tuning approaches include varying current in the resonator to alter effective capacitance, or varying relative weighting between two different LC resonators. While the former approach varies loop gain in addition to the phase, the latter requires careful choice of the resonators and their Qs for stable oscillations. This VCO architecture incorporates two coupled fixed-frequency LC oscillators to generate a variable-frequency output by varying the coupling between two oscillators.