DocumentCode :
2743700
Title :
The Method of Calculating Hysteresis Time of Piezometric Tube for Earth-rock Dam Based on GA-RBF
Author :
Qie, Zhihong ; Wu, Xinmiao ; Furuta, Hitoshi ; Si, Chundi ; Zhou, Ruilin
Author_Institution :
Agric. Univ. of Hebei, Baoding
Volume :
2
fYear :
0
fDate :
0-0 0
Firstpage :
8523
Lastpage :
8527
Abstract :
Basing on the GA method, hysteresis time of piezometric tube is calculated according to the linear correlation between the reservoir level and piezometric tube level when the hysteresis time is deducted. Radial Basis Function (RBF) is used to simulate process between reservoir level and piezometric tube level. The influence of width parameter to fit and forecast effect is discussed and the optimization method to width parameter of basic function is put forward. Finally, in order to test the GA-RBF method, the piezometric tube and reservoir level observation data of an earth-rock dam is analyzed by the method
Keywords :
dams; genetic algorithms; geophysics computing; hydrological techniques; hysteresis; level measurement; level meters; radial basis function networks; reservoirs; earth-rock dam; genetic algorithm; hysteresis time; linear correlation; neural network; optimization; piezometric tube level; radial basis function; reservoir level; Agriculture; Automation; Genetic algorithms; Hysteresis; Informatics; Intelligent control; Neural networks; Optimization methods; Reservoirs; Testing; earth-rock dam; genetic algorithm; hysteresis time; neural network; piezometric tube level;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Intelligent Control and Automation, 2006. WCICA 2006. The Sixth World Congress on
Conference_Location :
Dalian
Print_ISBN :
1-4244-0332-4
Type :
conf
DOI :
10.1109/WCICA.2006.1713642
Filename :
1713642
Link To Document :
بازگشت