System and method for determining harmonic contributions from non-linear loads using recurrent neural networks

This paper proposes a neural network solution methodology for the problem of measuring the actual amount of harmonic current injected into a power network by a non-linear load. The determination of harmonic currents is complicated by the fact that the supply voltage waveform is distorted by other loads and is rarely a pure sinusoid. Harmonics may therefore be classified as contributions from the load on the one hand and contributions from the power system or supply harmonics on the other hand. A recurrent neural network architecture based method is used to find a way of distinguishing between the load contributed harmonics and supply harmonics, without disconnecting the load from the network. The main advantage of this method is that only waveforms of voltages and currents have to be measured. This method is applicable for both single and three phase loads. This could be fabricated into a commercial instrument that could be installed in substations of large customer loads, or used as a hand-held clip on instrument.