Analysis of the boost constant-frequency quasi-square-wave converters

Author

Yang, L. ; Zhang, Y.F. ; Lee, C.Q.

Author_Institution

Dept. of Electr. Eng. & Comput. Sci., Illinois Univ., Chicago, IL, USA

Volume

2

fYear

1994

fDate

3-5 Aug 1994

Firstpage

1172

Abstract

A family of constant-switching-frequency boost Quasi-Square-Wave Converters is obtained by adding a second switch at a different position in the variable-frequency boost Quasi-Square-Wave Converter. The new converters still maintain the zero-voltage-switching (ZVS) in the original switch while the second switch is ZVS or zero-current-switching (ZCS) depending its position. The voltage stresses for both the switches will not exceed the output voltage. Analysis of the converter is conducted with the normalized state-plane trajectory. A design example based on the analytic control characteristics curves is given. Comparison of performance characteristics among these converters are presented

Keywords

DC-DC power convertors; network analysis; switching circuits; analytic control characteristics; boost constant-frequency quasi-square-wave converters; design; normalized state-plane trajectory; voltage stresses; zero-current-switching; zero-voltage-switching; Capacitors; Circuits; Inductors; Resonance; Stress; Switches; Switching converters; Switching frequency; Zero current switching; Zero voltage switching;

fLanguage

English

Publisher

ieee

Conference_Titel

Circuits and Systems, 1994., Proceedings of the 37th Midwest Symposium on

Conference_Location

Lafayette, LA

Print_ISBN

0-7803-2428-5

Type

conf

DOI

10.1109/MWSCAS.1994.519019

Filename

519019