DocumentCode :
2760811
Title :
An UWB planar out-of-phase power divider employing microstrip-slot and parallel stripline-microstrip transitions
Author :
Abbosh, A.M. ; Bialkowski, M.E. ; Mazierska, J.
Author_Institution :
Univ. of Queensland, Brisbane
fYear :
2006
fDate :
12-15 Dec. 2006
Firstpage :
905
Lastpage :
908
Abstract :
The design of a planar out-of-phase power divider with an ultra wideband (UWB) performance is presented. The device employs two substrates with a common ground plane. A coupling between two microstrip lines on the top and bottom substrate layers through a slot in the common ground plane, and a transition from two microstrip lines to a parallel stripline are used to achieve an UWB operation. The simulated and measured results of the proposed divider reveal low insertion losses, good return loss at the three ports and fine isolation between the two output ports across the band 3.1 to more than 11 GHz with high phase stability.
Keywords :
microstrip lines; power dividers; ultra wideband technology; microstrip line; microstrip-slot; parallel stripline; phase stability; planar out-of-phase power divider; ultra wideband; Design engineering; Frequency; Insertion loss; Microstrip; Power amplifiers; Power dividers; Power engineering and energy; Stripline; Strips; Ultra wideband technology; Microstrip line; power divider; strip line; ultra wideband;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Microwave Conference, 2006. APMC 2006. Asia-Pacific
Conference_Location :
Yokohama
Print_ISBN :
978-4-902339-08-6
Electronic_ISBN :
978-4-902339-11-6
Type :
conf
DOI :
10.1109/APMC.2006.4429559
Filename :
4429559
Link To Document :
بازگشت