Title :
Improvement of a capacitor discharge impulse magnetizer circuit
Author :
Chen, Shen-yaur ; Huang, Kunsong ; Juang, Fuhshang
Author_Institution :
Dept. of Electro-Opt. Eng., Nat. Huwei Inst. of Technol., Taiwan
Abstract :
This paper describes a method to improve the production rate for a magnetizer machine by modifying its circuit configurations. A resistor was put in series with the recovery diode in order to bring out part of the heat from the magnetizing fixture. It also reduces the discharging time of the inductor. The branch of the recovery diode in series with the added resistor was moved so that they were in parallel with the discharging capacitor instead of parallel with the magnetizing fixture. It provides a discharging route for the capacitor which was charged reversely when the inductor was discharging.
Keywords :
capacitors; diodes; inductors; magnetic circuits; capacitor discharge; impulse magnetizer circuit; inductor; magnetizer machine; recovery diode; series resistor; Capacitors; Diodes; Fixtures; Heat recovery; Inductors; Magnetic circuits; Magnetic flux; Magnetic materials; Resistors; Saturation magnetization;
Conference_Titel :
Power Electronics and Drive Systems, 2003. PEDS 2003. The Fifth International Conference on
Print_ISBN :
0-7803-7885-7
DOI :
10.1109/PEDS.2003.1283139
