DocumentCode
2788532
Title
100 kV picosecond all solid state pulser
Author
Efanov, V.M. ; Kriklenko, A.V. ; Yarin, P.M. ; Daviduk, N.J.
Author_Institution
FID Technol. Ltd., St. Petersburg, Russia
fYear
2000
fDate
26-29 June 2000
Firstpage
201
Lastpage
202
Abstract
The 100 kV all solid state pulser is developed. The pulser produces the 2 ns wide pulse with rise time 0.3 ns. The load is 100 Ohms. The application of fast ionization devices (FID) and drift recovery diodes (DRD) made it possible to reach repetition rate up to 1 kHz and 40% efficiency. The output signal has negligible jitter <20 ps. The main block has dimensions 300/spl times/300/spl times/200 mm.
Keywords
ionisation; power semiconductor diodes; pulse generators; pulsed power supplies; 0.3 ns; 1 kHz; 10 kHz; 100 kHz; 100 kV; 100 mm; 100 ohm; 100 ps; 2 ns; 200 mm; 300 mm; 40 mm; 40 percent; 50 mm; all solid state pulser; drift recovery diodes; fast ionization devices; output signal; repetition rate; Connectors; Electric variables control; Power generation; Pulse generation; Pulse measurements; Pulse shaping methods; Pulsed power supplies; Solid state circuits; Switches; Voltage;
fLanguage
English
Publisher
ieee
Conference_Titel
Power Modulator Symposium, 2000. Conference Record of the 2000 Twenty-Fourth International
Conference_Location
Norfolk, VA, USA
ISSN
1076-8467
Print_ISBN
0-7803-5826-0
Type
conf
DOI
10.1109/MODSYM.2000.896201
Filename
896201
Link To Document