Analysis and control of dimensional precision in turning process

Author

Bi, Xuefeng ; Liu, Yongxian ; Liu, Yang

Author_Institution

Lab. of Adv. Manuf. & Autom., Northeastern Univ., Shenyang, China

fYear

2009

fDate

17-19 June 2009

Firstpage

3456

Lastpage

3459

Abstract

The aim of the present work is to evaluate dimensional precision in turning process. A new model of dimensional error taking into account of flank wear and spring back of machined surface of workpiece material was proposed. Flank wear land, tool nose radius and clearance angle are the crucial control parameters in this model. According to the proposed model, the dimensional error was calculated using flank wear land obtained from previous experimental results. The role of three control factors on determining dimensional error has been investigated. The calculation of dimensional error coupling with predict model of flank wear can realize the pre-estimation of dimensional precision in machining.

Keywords

turning (machining); clearance angle; control parameters; dimensional error; dimensional machining precision; flank wear; machined surface; spring back; tool nose radius; turning process; workpiece material; Error analysis; Error correction; Machining; Manufacturing automation; Nose; Rough surfaces; Springs; Surface finishing; Surface roughness; Turning; Dimensional error; Flank wear; Spring back; Turning process;

fLanguage

English

Publisher

ieee

Conference_Titel

Control and Decision Conference, 2009. CCDC '09. Chinese

Conference_Location

Guilin

Print_ISBN

978-1-4244-2722-2

Electronic_ISBN

978-1-4244-2723-9

Type

conf

DOI

10.1109/CCDC.2009.5192313

Filename

5192313