A novel design for the receiver of SAW reader

Author

Kun, Liu ; Min-Quan, Li

Author_Institution

Key Lab. of Intell. Comput. & Signal, Anhui Univ., Hefei, China

fYear

2011

fDate

15-17 July 2011

Firstpage

968

Lastpage

972

Abstract

DC-offset and 1/f noise are serious deficiencies of zero-IF receiver that it is limited in the application. A novel zero-IF receiver solution is presented to solve the problems about the DC-offset and 1/f noise of zero-IF. A receiver of the 915MHz SAW reader is designed, basing on the novel solution. The simulation platform of the circuit model and the communication system model are built under the environment of ADS. The parameters of each module are determined by calculating and simulating, combing ADIsimRF with ADS software in the receiver. The correctness of the receiver´s model is verified by the bit error rate simulation with communication system model. The furthest distance for receiver identification is 12 m, while its bit error rate is smaller than 10^-9.

Keywords

1/f noise; error statistics; integrated circuit modelling; receivers; surface acoustic wave devices; 1/f noise; ADIsimRF; ADS software; DC-offset; SAW reader; bit error rate simulation; circuit model; communication system model; frequency 915 MHz; receiver identification; zero-IF receiver; Bit error rate; Integrated circuit modeling; Interference; Noise; Radio frequency; Receivers; Surface acoustic waves; 1/f noise; DC-offset; SAW; receiver; zero-IF;

fLanguage

English

Publisher

ieee

Conference_Titel

Mechanic Automation and Control Engineering (MACE), 2011 Second International Conference on

Conference_Location

Hohhot

Print_ISBN

978-1-4244-9436-1

Type

conf

DOI

10.1109/MACE.2011.5987093

Filename

5987093