DocumentCode :
2803239
Title :
Impact of the rotor yoke geometry on rotor losses in permanent magnet machines
Author :
Alberti, Luigi ; Fornasiero, Emanuele ; Bianchi, Nicola
Author_Institution :
Dept. of Electr. Eng., Univ. of Padova, Padova, Italy
fYear :
2010
fDate :
12-16 Sept. 2010
Firstpage :
3486
Lastpage :
3492
Abstract :
This paper presents a study on the rotor losses of surface mounted PM machine with fractional-slot windings. Two rotor losses sources are considered: the losses measured due to the slot opening (without currents in the stator) and due to the MMF harmonics (mounting a rotor with de-magnetized PMs). The rotor losses are measured at no-load and under load. In this condition, the two losses sources give rise to the rated rotor losses. It is shown that these rotor losses are lower than considering the sum of the first two measurements. This is investigated using both analytical models and FE simulations. Then the impact of the rotor geometry on the rotor losses is considered and some design considerations are reported.
Keywords :
finite element analysis; machine windings; permanent magnet machines; rotors; FE simulations; MMF harmonics; de-magnetized PM; fractional-slot windings; permanent magnet machines; rotor losses; rotor yoke geometry; surface mounted PM machine; Analytical models; Current measurement; Harmonic analysis; Loss measurement; Rotors; Stator windings;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Energy Conversion Congress and Exposition (ECCE), 2010 IEEE
Conference_Location :
Atlanta, GA
Print_ISBN :
978-1-4244-5286-6
Electronic_ISBN :
978-1-4244-5287-3
Type :
conf
DOI :
10.1109/ECCE.2010.5618299
Filename :
5618299
Link To Document :
بازگشت