DocumentCode :
2811839
Title :
A wideband inductive output tube
Author :
Kowalczyk, Richard D. ; Kirshner, Mark F. ; True, Richard B. ; Wilsen, Craig B. ; Boyle, Michael A. ; Schult, Holger ; Cipolla, John C.
Author_Institution :
Electron Devices, L-3 Commun., San Carlos, CA, USA
fYear :
2009
fDate :
28-30 April 2009
Firstpage :
420
Lastpage :
420
Abstract :
L-3 electron devices division (EDD) is developing a wideband IOT (WBIOT) with a 1 dB bandwidth greater than ten percent. High efficiency, good linearity, and compact size are provided by emission gated modulation of the electron beam directly at the cathode surface. Through use of a high impedance input circuit and an extended interaction output circuit, the instantaneous bandwidth of existing IOTs is increased by a factor of five, making the WBIOT suitable for use in a broad range of radar and communications applications.
Keywords :
cavity resonators; electron beam applications; radar; cathode surface; electron devices division; extended interaction output circuit; radar; wideband inductive output tube; Bandwidth; Cathodes; Circuits; Electron beams; Electron devices; Linearity; Optical modulation; Radar applications; Surface impedance; Wideband; IOT; Inductive output tube; UHF; bandwidth; communications; radar; wideband;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Vacuum Electronics Conference, 2009. IVEC '09. IEEE International
Conference_Location :
Rome
Print_ISBN :
978-1-4244-3500-5
Electronic_ISBN :
978-1-4244-3501-2
Type :
conf
DOI :
10.1109/IVELEC.2009.5193434
Filename :
5193434
Link To Document :
بازگشت