A new wireless sensor networks localization scheme with antenna arrays

In wireless sensor networks (WSN) location awareness is required to use the communication advantages of adaptive antenna arrays (AAA) and use energy efficiency location based routing protocols. In this work, we introduce a simple and practical location estimation technique which uses AAAs at the central node in WSNs. This localization technique can be used at the setup phase in the location based routing protocol. This technique is based on scanning the desired region in azimuth and radial directions by changing parameters of downlink beam. This sweeping process can activate the nodes in the desired region which is specified by antenna beam width and beam direction of the localization beam and also by minimum and maximum thresholds (R_min and R_max) for the received signal strength indicator (RSSI). Active nodes in the desired region transmit their IDs and RSSI levels via multi hop communication to the central node. Unlike GPS-based or beacon based localization techniques, the proposed technique does not require any modification in the sensor nodes. We demonstrate different scenarios for performance analysis of this localization technique. The results show that by carefully adjusting these parameters, desired performance can be achieved. The accuracy of location estimation depends on beam direction, beam width and transmitting power for downlink beams.