EMCP microstrip antennas as feed for satellite receiver

Author

Singh, A.K. ; Kumar, G.

Author_Institution

Dept. of Electr. Eng., Indian Inst. of Technol., Bombay, India

Volume

2

fYear

1996

fDate

21-26 July 1996

Firstpage

1274

Abstract

Horn antennas with peripheral chokes are used as feeds for reflector antennas in satellite TV receivers for C-band operation. A microstrip antenna (MSA) is proposed which can replace the existing horn feed. The advantages of this feed are compact size, reduced cost, reduced volume and weight, integration of the required electronics on the same substrate and small aperture blockage. Although MSAs are known for their narrow bandwidth, the use of a stacked patch allows a wider bandwidth. Double layer stacked circular microstrip antennas with different radii have been proposed for use as reflector feeds for satellite communications in the C-band (3.7-4.2 GHz) as well as extended C-band (3.5-4.5 GHz).

Keywords

antenna radiation patterns; direct broadcasting by satellite; microstrip antennas; reflector antenna feeds; satellite antennas; television broadcasting; television receivers; 3.5 to 4.5 GHz; C-band; EMCP microstrip antennas; MSA; SHF; aperture blockage; bandwidth; cost; double layer stacked circular microstrip antennas; extended C-band; radii; reflector antennas; satellite TV receivers; satellite communications; satellite receiver; size; volume; weight; Antenna feeds; Bandwidth; Horn antennas; Inductors; Microstrip antennas; Receiving antennas; Reflector antennas; Satellite antennas; Satellite broadcasting; TV receivers;

fLanguage

English

Publisher

ieee

Conference_Titel

Antennas and Propagation Society International Symposium, 1996. AP-S. Digest

Conference_Location

Baltimore, MD, USA

Print_ISBN

0-7803-3216-4

Type

conf

DOI

10.1109/APS.1996.549829

Filename

549829