Optical sensor for ammonia based on polyaniline

Author

Quinto, E. ; Sevilla, F., III

Author_Institution

Fac. of Eng., University of Santo Tomas, Manila, Philippines

fYear

2005

fDate

5-7 Sept. 2005

Firstpage

115

Lastpage

117

Abstract

Polyaniline was immobilized on an acetate film and configured to fit into a window of a sample cell. The system showed a stable response at 600 nm where absorbance readings were done giving a response time of 1.2 minutes. It showed good reproducibility, with a relative standard deviation of 1%. Ammonia gas samples were collected from the head space of aqueous ammonia solutions and fed into the sample cell. These were tested in the sample cell and showed linear response with an equation: y = 0.0139x - 0.0977, and a linearity of 0.9317. Its calculated limit of detection is 2.16. These figures of merit show the potential of a simple sensor based on polyaniline using the acetate as a support matrix.

Keywords

ammonia; chemical sensors; gas sensors; optical sensors; polymer films; spectrochemical analysis; visible spectra; 1.2 min; 600 nm; NH₃; acetate film; ammonia; optical sensor; polyaniline; Chemical sensors; Conducting materials; Conductive films; Delay; Electric resistance; Optical films; Optical sensors; Oxidation; Polymers; Testing;

fLanguage

English

Publisher

ieee

Conference_Titel

Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005 Asian Conference on

Print_ISBN

0-7803-9370-8

Type

conf

DOI

10.1109/ASENSE.2005.1564519

Filename

1564519