DocumentCode :
2855387
Title :
A two-stage electronic ballast for HID lamp with flyback PFC
Author :
Liang, Tsorng-Juu ; Liao, Hsueh-Ko ; Chen, Jiann-Fuh ; Huang, Chien-Ming ; Lin, Ho-Ta ; Cheng, Chun-An
Author_Institution :
Department of Electrical Engineering / Advanced Optoelectronic Technology Center (AOTC) / Green Energy Electronics Research Center (GREERC), National Cheng-Kung University, Tainan, Taiwan
Volume :
1
fYear :
2012
fDate :
2-5 June 2012
Firstpage :
192
Lastpage :
198
Abstract :
This paper presents a two-stage electronic ballast for metal-halide (MH) lamps. The first stage is a single-switch flyback and buck-boost integrated converter. The post stage is a half-bridge inverter driving the MH lamps with low-frequency square-wave current for avoiding acoustic resonance. The operating principle of the proposed topology is discussed. Also, constant power control is realized using the methodology employed for peak inductor current control. Finally, a laboratory prototype of a 70W electronic ballast for MH lamp operated with 200∼264V input voltage is implemented to verify the feasibility. The measured results illustrate that the harmonic distortion of AC input current satisfies the requirements of the IEC 61000-3-2 Class C standard.
Keywords :
Frequency conversion; Logic gates; Resonant frequency; Switches; electronic ballast; high power factor; metal-halide lamp; two-stage;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Power Electronics and Motion Control Conference (IPEMC), 2012 7th International
Conference_Location :
Harbin, China
Print_ISBN :
978-1-4577-2085-7
Type :
conf
DOI :
10.1109/IPEMC.2012.6258901
Filename :
6258901
Link To Document :
بازگشت