Buncher cavity for ERL

Author

Veshcherevich, V. ; Belomestnykh, S.

Author_Institution

Lab. for Elementary-Particle Phys., Cornell Univ., Ithaca, NY, USA

Volume

2

fYear

2003

fDate

12-16 May 2003

Firstpage

1198

Abstract

Design of the buncher cavity for Cornell/JLab ERL project is presented. This is a reentrant spherical copper cavity at a frequency of 1300 MHz. It will be installed between a 500 keV electron gun and superconducting accelerating sections in the injector part of ERL. The cavity has Q of 20,000 and a shunt impedance of 2.1 MOhm. For a design cavity voltage of 200 kV, power dissipated in cavity is as much as 9.6 kW. The cavity has a coaxial loop coupler and will be driven by a 17.5 kW klystron. The estimates of cavity influence on beam dynamics are also discussed.

Keywords

accelerator RF systems; accelerator cavities; electron guns; klystrons; linear accelerators; particle beam bunching; particle beam dynamics; particle beam injection; superconducting magnets; 1300 MHz; 17.5 kW; 2.1 Mohm; 200 kV; 500 keV; ERL; Energy Recovery Linac; beam dynamics; buncher cavity; cavity voltage; coaxial loop coupler; electron gun; injector part; klystron; shunt impedance; spherical copper cavity; superconducting accelerating sections; Acceleration; Coaxial components; Copper; Electron beams; Geometry; Laboratories; Particle beams; Radio frequency; Resonance; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 2003. PAC 2003. Proceedings of the

ISSN

1063-3928

Print_ISBN

0-7803-7738-9

Type

conf

DOI

10.1109/PAC.2003.1289651

Filename

1289651