Design of beam transfer lines for the NSLS II

Author

Tsoupas, N. ; Shaftan, T. ; Rose, J. ; Pinayev, I. ; Heese, R. ; Meier, R. ; Stelmach, C.

Author_Institution

BNL, Upton

fYear

2007

fDate

25-29 June 2007

Firstpage

664

Lastpage

666

Abstract

The NSLS-II light source which is a proposed facility to be built at Brookhaven National Laboratory utilizes two synchrotron accelerator rings: the booster and the storage ring (SR). Designing the NSLS-II injector we considered two options for the booster layout, where the rings either a) share the same tunnel, but placed at different horizontal planes or b) booster is located in a separate building. The booster which accepts beam from the linac, accelerates the electron beam to an energy of 3.0 GeV and the beam is extracted to the booster to storage ring (BtS) transport line which transports the beam and injects it into the SR ring. The design procedure for each of the two options of the BtS line and other details about the optics and the magnetic elements of the line are presented in this paper.

Keywords

booster injectors; electron accelerators; electron beams; light sources; linear accelerators; particle beam injection; storage rings; synchrotrons; Booster to Storage Ring transport line; Brookhaven National Laboratory; NSLS-II injector; NSLS-II light source; beam transfer lines; electron beam; linac; magnetic elements; storage ring; synchrotron accelerator rings; Acceleration; Buildings; Electron beams; Laboratories; Light sources; Linear particle accelerator; Particle beams; Storage rings; Strontium; Synchrotrons;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 2007. PAC. IEEE

Conference_Location

Albuquerque, NM

Print_ISBN

978-1-4244-0916-7

Type

conf

DOI

10.1109/PAC.2007.4440313

Filename

4440313