DocumentCode :
2894183
Title :
Operation and performance of the new Fermilab Booster H-injection system
Author :
Lackey, J. ; Garcia, F.G. ; Popovic, M. ; Prebys, E.
Author_Institution :
FNAL, Batavia
fYear :
2007
fDate :
25-29 June 2007
Firstpage :
1709
Lastpage :
1711
Abstract :
The operation and performance of the new, 15 Hz, H- charge exchange injection system for the FNAL Booster is described. The new system installed in 2006 was necessary to allow injection into the Booster at up to 15 Hz. It was built using radiation hardened materials which will allow the Booster to reliably meet the high intensity and repetition rate requirements of the Fermilab´s HEP program. The new design uses three orbit bump magnets (Orbumps) rather than the usual four and permits injection into the Booster without a septum magnet. Injection beam line modification and compensation for the quadrupole gradients of the Orbump magnets is discussed.
Keywords :
accelerator magnets; beam handling equipment; particle beam injection; proton accelerators; proton beams; synchrotrons; FNAL booster; Fermilab Booster H- injection system; beam line modification; charge exchange injection system; frequency 15 Hz; orbit bump magnets; orbump magnets; quadrupole gradients; radiation hardened materials; Apertures; Electrons; Geometry; Magnetic materials; Magnets; Materials reliability; Particle beam injection; Protons; Pulsed power supplies; Radiation hardening;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Particle Accelerator Conference, 2007. PAC. IEEE
Conference_Location :
Albuquerque, NM
Print_ISBN :
978-1-4244-0916-7
Type :
conf
DOI :
10.1109/PAC.2007.4440872
Filename :
4440872
Link To Document :
بازگشت