• DocumentCode
    2898099
  • Title

    Insertion device R&D for NSLS-II

  • Author

    Tanabe, Toshiya ; Harder, David A. ; Rakowsky, George ; Shaftan, Timur ; Skaritka, John

  • Author_Institution
    BNL, Upton
  • fYear
    2007
  • fDate
    25-29 June 2007
  • Firstpage
    1368
  • Lastpage
    1370
  • Abstract
    NSLS-II is a medium energy storage ring of 3 GeV electron beam energy with sub-nm.rad horizontal emittance and top-off capability at 500 mA. Damping wigglers will be used not only to reduce the beam emittance but also for broadband sources for users. Cryo-permanent magnet undulators (CPMUs) are considered for hard X-ray planar device, and permanent magnet based elliptically polarized undulators (EPUs) are for soft X-ray polarization control. Rigorous R&D plans have been established to pursue the performance enhancement of the above devices as well as building new types of insertion devices such as high temperature superconducting wiggler/undulators. This paper describes the details of these activities and discuss technical issues.
  • Keywords
    accelerator magnets; electromagnetic wave polarisation; electron accelerators; electron beams; light sources; permanent magnets; storage rings; synchrotrons; wigglers; Cryo-Permanent Magnet Undulators; Elliptically Polarized Undulators; National Synchrotron Light Source -II; beam emittance; broadband sources; current 500 mA; damping wigglers; electron beam energy; electron volt energy 3 GeV; hard X-ray planar device; high temperature superconducting wiggler-undulators; horizontal emittance; insertion device; medium energy storage ring; permanent magnet; soft X-ray polarization control; Damping; Electron beams; Energy storage; Magnetic devices; Permanent magnets; Polarization; Research and development; Superconducting magnetic energy storage; Temperature; Undulators;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Particle Accelerator Conference, 2007. PAC. IEEE
  • Conference_Location
    Albuquerque, NM
  • Print_ISBN
    978-1-4244-0916-7
  • Type

    conf

  • DOI
    10.1109/PAC.2007.4441085
  • Filename
    4441085