Frequency-Mismatch-Tolerant Silicon Vibratory Gyroscope without Vacuum Package for Automotive Applications

This paper describes a low-cost silicon vibratory gyroscope that tolerates a relatively large mismatch between the driving-mode and sensing-mode frequencies. The gyroscope is based on beam-mass structure and realized by one silicon proof mass and two beams for the driving and sensing mode. Piezoelectric actuation is used to produce a large driving mode vibration displacement (about 100 mum) with about 32 V_peak-to-peak. Two tiny sensing beams are separated from the vertical silicon beam to increase the sensitivity while keeping the sensing-mode resonant frequency high. Piezoresistive and piezoelectrical sensing mechanisms are applied to two different gyroscopes. The gyroscope operating at 1-4 kHz is capable of sub-degree-per-second angular rate sensitivity without any vacuum package.