Temperature Monitor System of Heating Network Based on Optical Fiber Communication

Author

Wang, Fei ; Wang, Weijie ; Cao, Rong ; Zhao, Xuezeng

Author_Institution

Sch. of Mech. Eng., Harbin Inst. of Technol., Harbin, China

fYear

2010

fDate

19-21 June 2010

Firstpage

1

Lastpage

4

Abstract

A temperature monitoring system installed in Daqing Petrochemical Company, based on a combination of RS485 serial bus and optical fiber communication has been presented in this article, in which the intelligent temperature sensor DS18B20 was used. The interface circuit between the micro control unit (MCU) and DS18B20 has been designed, which can enhance the sensor-driven ability of the MCU and improve the reliability of signal transmission. Consequently, the interface and communication protocol between the MCU and data bus is designed. It is worth mentioning that a the combination of RS485 serial bus and optical fiber communication was introduced at the first time in the application of heating net work monitoring for a petrol chemical plant, which has succeeded in reducing the system cost whereas enhancing the communication reliability.

Keywords

data acquisition; intelligent sensors; optical fibre communication; temperature sensors; communication protocol; communication reliability; heating network; intelligent temperature sensor; micro control unit; optical fiber communication; sensor-driven ability; signal transmission; temperature monitor system; Circuits; Communication system control; Heating; Intelligent sensors; Optical fiber communication; Petrochemicals; Protocols; Signal design; Temperature measurement; Temperature sensors;

fLanguage

English

Publisher

ieee

Conference_Titel

Photonics and Optoelectronic (SOPO), 2010 Symposium on

Conference_Location

Chengdu

Print_ISBN

978-1-4244-4963-7

Electronic_ISBN

978-1-4244-4964-4

Type

conf

DOI

10.1109/SOPO.2010.5504123

Filename

5504123