DocumentCode
2954923
Title
Comparison of two Josephson array voltage standard systems using a set of Zener references
Author
Yi-Hua Tang
Author_Institution
Nat. Inst. of Stand. & Technol., Gaithersburg, MD, USA
fYear
1998
fDate
6-10 July 1998
Firstpage
357
Lastpage
358
Abstract
Two Josephson Array Voltage Standard Systems using different calibration algorithms are operated at the National Institute of Standards and Technology (NIST). A manual switch system is designed to make system comparisons by measuring against the 1.018 V of three Zener references. The difference of the average of the three Zener references is smaller than 1 nV.
Keywords
Zener diodes; calibration; measurement standards; superconducting junction devices; voltage measurement; 1.018 V; Josephson array voltage standard; NIST; Zener reference; calibration algorithm; manual switch; Calibration; Frequency; Hardware; Instruments; Josephson junctions; NIST; Performance evaluation; Physics; Switches; Voltage;
fLanguage
English
Publisher
ieee
Conference_Titel
Precision Electromagnetic Measurements Digest, 1998 Conference on
Conference_Location
Washington, DC, USA
Print_ISBN
0-7803-5018-9
Type
conf
DOI
10.1109/CPEM.1998.699949
Filename
699949
Link To Document