DocumentCode
2954927
Title
A 1.5-V supply, 10.7-MHz, bandpass gm-C filter in a 0.6μm standard CMOS technology
Author
Tajalli, Armin ; Atarodi, Mojtaba
Author_Institution
Emad Semicon, Tehran, Iran
fYear
2002
fDate
11-13 Dec. 2002
Firstpage
46
Lastpage
49
Abstract
A 1.5-V single supply, second order continuous-time bandpass filter, on a 0.6μm standard CMOS process is designed. The THD of the transconductor for a 0.7Vpp input, is -50dB at 10-MHz. In the proposed transconductor structure, the whole circuit, apart from a dc level-shifter based on a voltage doubler, is biased by a single 1.5-V supply. Due to this structure, a high current voltage doubler is not required and the whole filter draws less than 70μm current from this doubler making an on-chip voltage doubler feasible. Also, a new linear common-mode detector with high-frequency response is designed to stabilize the output common-mode voltage.
Keywords
CMOS integrated circuits; band-pass filters; 0.6 micron; 0.7 V; 1.5 V; 10 MHz; 10.7 MHz; 50 dB; bandpass gm-C filter; high-frequency response; linear common-mode detector; on-chip voltage doubler; output common-mode voltage; standard CMOS technology; Analog circuits; Band pass filters; CMOS process; CMOS technology; Charge pumps; Circuit simulation; Frequency; Low voltage; Threshold voltage; Transconductors;
fLanguage
English
Publisher
ieee
Conference_Titel
Microelectronics, The 14th International Conference on 2002 - ICM
Print_ISBN
0-7803-7573-4
Type
conf
DOI
10.1109/ICM-02.2002.1161493
Filename
1161493
Link To Document