Title :
Study on the effects of processing parameters laser microdrilling
Author :
Guoquan, Shi ; Tongyu, Wang
Author_Institution :
Changchun Univ. of Sci. & Technol., Changchun
Abstract :
An investigation of the effects of processing parameters in CO2-laser micro drilling has been performed. It was found that small holes with diameters in the range 0.1~1.0 mm can be processed by used the optimum selection of the laser beam parameters. This investigation utilizes commercial available lasers and drilling in 1 mm steel will be described. The paper describes the results of a parametric investigation including the optimum parameters selection and their influence on the obtained hole qualities.
Keywords :
drilling; gas lasers; laser beam machining; micromachining; CO2-laser microdrilling process; drilling processing parameter effects; laser beam parameters; size 0.1 mm to 1.0 mm; Absorption; Drilling; Laser beam cutting; Laser beams; Laser modes; Optical materials; Optical reflection; Plasma materials processing; Power lasers; Surface emitting lasers;
Conference_Titel :
Mechatronics and Automation, 2008. ICMA 2008. IEEE International Conference on
Conference_Location :
Takamatsu
Print_ISBN :
978-1-4244-2631-7
Electronic_ISBN :
978-1-4244-2632-4
DOI :
10.1109/ICMA.2008.4798794
