• DocumentCode
    2967908
  • Title

    6 - 18 GHz Edge Mode Isolator

  • Author

    Adam, John D. ; Stitzer, Steven N. ; Gaglione, Stanley

  • Author_Institution
    Baltimore, Baltimore
  • fYear
    2007
  • fDate
    3-8 June 2007
  • Firstpage
    687
  • Lastpage
    690
  • Abstract
    A stripline geometry with high permeability pole pieces in contact with the upper and lower ground planes minimized the magnetic internal field non-uniformity that can degrade performance at low frequencies. A commercially available ferrite with 4piM=3440 gauss gave optimum isolator performance. YIG sections at the input and output with 4piM=1780 gauss minimized low frequency loss due to excitation of magnetostatic waves. The calculated S12 was ~ldB from 4GHz to 20GHz with S21 exceeding -20dB from 6GHz to 17GHz. Measured S21, was >-3dB from 7GHz to 19GHz. S12, was <-10dB from 6GHz to 20GHz.
  • Keywords
    ferrite isolators; magnetic microwave devices; magnetostatic waves; strip line components; YIG sections; edge mode isolator; ferrite; frequency 6 GHz to 18 GHz; high permeability pole pieces; magnetostatic waves; stripline geometry; Dielectric materials; Ferrites; Frequency; Gaussian processes; Isolators; Magnetic materials; Magnetostatic waves; Permanent magnets; Soft magnetic materials; Stripline; Ferrite; edge-mode; isolator; microwave;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Microwave Symposium, 2007. IEEE/MTT-S International
  • Conference_Location
    Honolulu, HI
  • ISSN
    0149-645X
  • Print_ISBN
    1-4244-0688-9
  • Electronic_ISBN
    0149-645X
  • Type

    conf

  • DOI
    10.1109/MWSYM.2007.380013
  • Filename
    4263910
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=2967908