Optimizing stencil printing parameters for organic materials

Author

Tongbi Jiang ; Ahmad, Sabarinah Sh ; Jesse, Carole ; Moden, Walter

Author_Institution

Micron Technol. Inc., Boise, ID, USA

fYear

1997

fDate

13-15 Oct 1997

Firstpage

68

Lastpage

72

Abstract

Effect of printing speed and squeegee pressure were studied for the quality of stencil printed organic material using a commercially available statistical application, JMP(R). Prints were evaluated by measuring their actual widths compared to the stencil opening in both parallel and perpendicular directions relative to squeegee travel; by print wall angle; film thickness and the extent of material bleed

Keywords

assembling; design of experiments; printed circuit manufacture; printing; process control; production engineering computing; quality control; statistical analysis; JMP software; film thickness; material bleed; organic materials; print wall angle; printing speed; squeegee pressure; statistical application; stencil printing parameters optimisation; Algorithm design and analysis; Filling; Laboratories; Manufacturing processes; Organic materials; Printing; Process control; Production; Rough surfaces; Thickness measurement;

fLanguage

English

Publisher

ieee

Conference_Titel

Electronics Manufacturing Technology Symposium, 1997., Twenty-First IEEE/CPMT International

Conference_Location

Austin, TX

ISSN

1089-8190

Print_ISBN

0-7803-3929-0

Type

conf

DOI

10.1109/IEMT.1997.626878

Filename

626878