DocumentCode
2978507
Title
A novel control method for IGBT current source rectifier
Author
Tan, Longcheng ; Li, Yaohua ; Wang, Ping ; Liu, Congwei ; Li, Zixin ; Chen, Yonggang ; Xu, Wei
Author_Institution
Inst. of Electr. Eng., Chinese Acad. of Sci., Beijing
fYear
2008
fDate
1-3 Sept. 2008
Firstpage
405
Lastpage
408
Abstract
A novel power factor control and power flow control method for IGBT current source rectifier is proposed in this paper. Unlike the conventional control method in the a-b-c three-phase stationary frame, the proposed control is based on the d-q rotating frame. The proposed power factor compensation scheme can provide maximum achievable power factor under all operating conditions, including the regenerative mode. Whatpsilas more, the scheme is parameter insensitive, which can improve the systempsilas stability. Due to the IGBTpsilas switching character, the space vector modulation (SVM) is adopted, so the fast dynamic response and the little harmonic content can be achieved. Simulation results are provided to verify the theoretical analysis.
Keywords
bipolar transistor circuits; constant current sources; dynamic response; insulated gate bipolar transistors; machine control; power factor; rectifying circuits; IGBT current source rectifier; a-b-c three-phase stationary frame; d-q rotating frame; dynamic response; harmonic content; power factor compensation scheme; power factor control method; power flow control method; space vector modulation; Capacitors; Control systems; Current control; Delay; Displacement control; Insulated gate bipolar transistors; Pi control; Power harmonic filters; Reactive power; Rectifiers; current source rectifier; power factor control; regenerative operation; space vector modulation;
fLanguage
English
Publisher
ieee
Conference_Titel
Power Electronics and Motion Control Conference, 2008. EPE-PEMC 2008. 13th
Conference_Location
Poznan
Print_ISBN
978-1-4244-1741-4
Electronic_ISBN
978-1-4244-1742-1
Type
conf
DOI
10.1109/EPEPEMC.2008.4635299
Filename
4635299
Link To Document