DocumentCode :
2987236
Title :
An adaptive frequency control method using thermal feedback for reconfigurable hardware applications
Author :
Jones, Phillip H. ; Cho, Young H. ; Lockwood, John W.
Author_Institution :
Appl. Res. Lab., Washington Univ.
fYear :
2006
fDate :
Dec. 2006
Firstpage :
229
Lastpage :
236
Abstract :
Reconfigurable circuits running in field programmable gate arrays (FPGAs) can be dynamically optimized for power based on computational requirements and thermal conditions of the environment. In the past, FPGA circuits were typically small and operated at a low frequency. Few users were concerned about high-power consumption and the heat generated by FPGA devices. The current generation of FPGAs, however, use extensive pipelining techniques to achieve high data processing rates and dense layouts that can generate significant amounts of heat. FPGA circuits can be synthesized that can generate more heat than the package can dissipate. For FPGAs that operate in controlled environments, heatsinks and fans can be mounted to the device to extract heat from the device. When FPGA devices do not operate in a controlled environment, however, changes to ambient temperature due to factors such as the failure of a fan or a reconfiguration of bitfile running on the device can drastically change the operating conditions. A protection mechanism is needed to ensure the proper operation of the FPGA circuits when such a change occurs. To address these issues, we have devised a reconfigurable temperature monitoring system that gives feedback to the FPGA circuit using the measured junction temperature of the device. Using this feedback, we designed a novel dual frequency switching system that allows the FPGA circuits to maintain the highest level of performance for a given maximum junction temperature. Our working system has been implemented and deployed on the field programmable port extender (FPX) platform at Washington University in St. Louis. Our experimental results with a scalable image correlation circuit show up to a 2.4times factor increase in performance as compared to a system without thermal feedback. Our circuit ensures that the device performs the maximum required computation while always operating within a safe temperature range
Keywords :
feedback; field programmable gate arrays; frequency control; heat sinks; thermal management (packaging); dual frequency switching system; field programmable gate arrays; field programmable port extender; frequency control; heat generation; heat sinks; image correlation circuit; junction temperature; reconfigurable circuits; reconfigurable temperature monitoring system; thermal feedback; Adaptive control; Automatic frequency control; Circuit synthesis; Data processing; Feedback circuits; Field programmable gate arrays; Hardware; Pipeline processing; Temperature control; Temperature measurement;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Field Programmable Technology, 2006. FPT 2006. IEEE International Conference on
Conference_Location :
Bangkok
Print_ISBN :
0-7803-9729-0
Electronic_ISBN :
0-7803-9729-0
Type :
conf
DOI :
10.1109/FPT.2006.270316
Filename :
4042438
Link To Document :
بازگشت