Area/delay estimation for digital signal processor cores

Hardware/software partitioning is one of the key processes in a hardware/software cosynthesis system for digital signal processor cores. In hardware/software partitioning, area and delay estimation of a processor core plays an important role since the hardware/software partitioning process must determine which part of a processor core should be realized by hardware units and which part should be realized by a sequence of instructions based on execution time of an input application program and area of a synthesized processor core. This paper proposes area and delay estimation equations for digital signal processor cores. For area estimation, we show that total area for a processor core can be derived from the sum of area for a processor kernel and area for additional hardware units. Area for a processor kernel can be mainly obtained by minimum area for a processor kernel and overheads for adding hardware units and registers. Area for a hardware unit can be mainly obtained by its type and operation bit width. For delay estimation, we show that critical path delay for a processor core can be derived from the delay of a hardware unit which is on the critical path in the processor core. Experimental results demonstrate that errors of area estimation are less than 2% and errors of delay estimation are less than 2ns when comparing estimated area and delay with logic-synthesized area and delay