DocumentCode :
29957
Title :
Reverse conducting–IGBTs initial snapback phenomenon and its analytical modelling
Author :
Vemulapati, Umamaheswara ; Kaminski, N. ; Silber, Dieter ; Storasta, Liutauras ; Rahimo, Munaf
Author_Institution :
Corp. Res., ABB Switzerland Ltd., Baden-Dättwil, Switzerland
Volume :
8
Issue :
3
fYear :
2014
fDate :
May-14
Firstpage :
168
Lastpage :
175
Abstract :
Analytical models have been proposed to describe the onset current density for the initial snapback in the transistor on-state mode and in the blocking state of reverse conducting-insulated gate bipolar transistors (RC-IGBT) for the stripe and cylindrical designs of the anode shorts. In cylindrical case, there are two possible ways in designing the anode shorts and the authors have proposed an analytical model for each of them. The considered RC-IGBTs are vertical with soft punch-through type buffer designs. The analytical model has been evaluated with the aid of 2-D device simulations and measurements. The authors have investigated the initial snapback phenomenon for different voltage class devices at a given technology (anode and buffer profiles) and found out that the snapback voltage increases with the blocking capability but not the snapback current density. The authors have also observed that the initial snapback phenomenon is more pronounced at lower temperatures. From the analytical model as well as simulation and measurement results, the authors have found that for a given voltage class and technology, the p+-anode width is the only remaining design degree of freedom which determines the initial snapback. The adjustment of the on-state losses can then be done with the proportion of the n+-short region.
Keywords :
current density; insulated gate bipolar transistors; semiconductor device models; 2D device simulations; RC-IGBT; anode profiles; anode shorts; blocking capability; blocking state; buffer profiles; cylindrical case; initial snapback phenomenon; n+-short region; on-state losses; onset current density; p+-anode width; reverse conducting-IGBT; snapback current density; snapback voltage; soft punch-through type buffer designs; transistor on-state mode;
fLanguage :
English
Journal_Title :
Circuits, Devices & Systems, IET
Publisher :
iet
ISSN :
1751-858X
Type :
jour
DOI :
10.1049/iet-cds.2013.0222
Filename :
6824023
Link To Document :
بازگشت