DocumentCode :
30106
Title :
Triple band-notched aperture UWB antenna using hollow-cross-loop resonator
Author :
Ying Liu ; Zhe Chen ; Shuxi Gong
Author_Institution :
Nat. Key Lab. of Sci. & Technol. on Antennas & Microwaves, Xidian Univ., Xi´an, China
Volume :
50
Issue :
10
fYear :
2014
fDate :
May 8 2014
Firstpage :
728
Lastpage :
730
Abstract :
A rectangle-shaped aperture antenna for ultra-wideband (UWB) applications which can prevent the interference problems is presented. By attaching a hollow-cross-loop resonator (HCLR), triple-notched frequency bands centred at 3.5, 5.7 and 8.2 GHz are obtained. The HCLR is loaded in the aperture over the microstrip feedline. The proposed antenna has been successfully simulated and measured. Based on the results, it is shown that the proposed antenna yields an impedance bandwidth of 2.55-12 GHz with a voltage standing wave ratio (VSWR) <; 2, except for the triple-notched bands of 3.15-3.85 GHz (WiMAX band), 5.4-6.1 GHz (WLAN band) and 7.8-9.3 GHz (X-band satellite communication).
Keywords :
antenna feeds; aperture antennas; electromagnetic interference; microstrip antennas; microstrip resonators; microwave resonators; ultra wideband antennas; HCLR; VSWR; WLAN band; WiMAX; X-band satellite communication; frequency 3.5 GHz; frequency 5.7 GHz; frequency 8.2 GHz; hollow-cross-loop resonator; impedance bandwidth; interference; microstrip feedline; rectangle-shaped aperture antenna; triple band-notched aperture UWB antenna; ultra-wideband applications; voltage standing wave ratio;
fLanguage :
English
Journal_Title :
Electronics Letters
Publisher :
iet
ISSN :
0013-5194
Type :
jour
DOI :
10.1049/el.2013.4256
Filename :
6824040
Link To Document :
بازگشت