Title :
Techniques for modeling an induction motor with skewed slots with a time-stepping 2D-3D finite element method
Author :
Wendling, P. ; Guérin, C. ; Ruiz, R. ; Le Floch, Y. ; Lombard, P. ; Vilcot, M. ; Ducreux, J.P. ; Abakar, A. ; Sadi-haddad, L.
Author_Institution :
MAGSOFT Corp., NY
Abstract :
This paper deals with the effect of rotor skewing in induction machines. Two cases of rotors with an identical number of bars but different skewing angles (0 and 10.23 degrees) are compared. This analysis is based on results obtained from real tests and 2D simulations and models performed with a new FLUX application called SKEW. Two approaches for the calculation of the skewed machine are presented: the N-slice model and the extruded model
Keywords :
finite element analysis; induction motors; rotors; FLUX application; SKEW; extruded model; induction motor; rotors; skewed slots; time-stepping 2D-3D finite element method; Bars; Coupling circuits; Differential equations; Finite element methods; Induction machines; Induction motors; Interpolation; Magnetic flux; Rotors; Stators;
Conference_Titel :
Electrical Machines and Systems, 2005. ICEMS 2005. Proceedings of the Eighth International Conference on
Conference_Location :
Nanjing
Print_ISBN :
7-5062-7407-8
DOI :
10.1109/ICEMS.2005.202927
