The design of recorder radius tools to play four wheel vehicle based on microcontroller

Author

Oktodify, Dandy ; Aulia, Hilda Rizky ; Anggraeni, Tiara Nurul

Author_Institution

R&D, Keluarga Mahasiswa Univ., Jakarta, Indonesia

fYear

2011

fDate

15-17 Nov. 2011

Firstpage

214

Lastpage

219

Abstract

Record devices turning radius is needed to record the turning radius on vehicles. If you created an electronic recording devices turning radius then it could be utilized to serve as a standard, so it can determine the appropriate class path for a vehicle. The working principle of such a device is an ultrasound sensor mounted on one wheel of a car, and then the car goes around the arena that has been determined. Ultrasound is detected by the microcontroller then the received data is processed, to determine the radius of rotation. Test results from this tool to calculate the turning radius compared with the data issued by vehicle manufacturers were tested for turning radius, resulting in an average error of 0.4%.

Keywords

automobile manufacture; automotive electronics; microcontrollers; recorders; sensors; ultrasonic devices; wheels; car wheel; electronic recording device turning radius; four wheeled vehicle; microcontroller; recorder radius tools; ultrasound detection; ultrasound sensor; vehicle manufacturers; Government; Microcontrollers; Wheels; measurement algorithms; microcontroller; serial communication; ultra sonic sensor;

fLanguage

English

Publisher

ieee

Conference_Titel

Instrumentation Control and Automation (ICA), 2011 2nd International Conference on

Conference_Location

Bandung

Print_ISBN

978-1-4577-1462-7

Type

conf

DOI

10.1109/ICA.2011.6130159

Filename

6130159