Title :
A new static differential CMOS logic with superior low power performance
Author :
Elrabaa, Muhammad E S
Author_Institution :
Comput. Eng. Dept., King Fahd Univ. of Pet. & Minerals, Saudi Arabia
Abstract :
A new differential static CMOS logic (DSCL) family is devised. The new circuit is fully static, making it simple to design. The circuit topology of the DSCL and its operation is explained. Its performance in terms of delay, power, and area is compared to that of conventional static differential logic and dynamic differential logic. SPICE simulations using a 0.18 μm technology with a power supply of 1.8 V was utilized to evaluate the performance of the three circuits. Two different sets of simulations were carried out; one with equal input capacitances of all circuits and another with equal circuit delays. For each design, all circuits were optimized for minimum delay. It is shown that at equal input capacitance, the DSCL achieved 40% less delay than the DCVSL at one third the power. Also, at equal delay, the DSCL achieved 20% of the power dissipation of the DCVSL and 78% of the DDCVSL making it the most energy-efficient among the three circuits.
Keywords :
CMOS logic circuits; SPICE; capacitance; circuit optimisation; circuit simulation; delays; integrated circuit design; integrated circuit modelling; logic design; network topology; 0.18 micron; 1.8 V; DCVSL; DDCVSL; DSCL; DSCL circuit topology; SPICE simulations; area performance; circuit delays; circuit design; delay performance; differential cascode voltage switch logic; differential static CMOS logic; dynamic differential logic; energy-efficient circuits; equal input capacitance; fully static circuit; input capacitances; low power performance; minimum delay optimized circuit; power dissipation; power performance; power supply; static differential logic; CMOS logic circuits; Capacitance; Circuit simulation; Circuit topology; Delay; Design optimization; Energy efficiency; Power dissipation; Power supplies; SPICE;
Conference_Titel :
Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International Conference on
Print_ISBN :
0-7803-8163-7
DOI :
10.1109/ICECS.2003.1301910