An observation of noise intervention into acoustic emission signal on concrete structure

This paper is presented the observation of noise intervention into acoustic emission (AE) signal on reinforced concrete beam based on data recorded in the AEWin software at different pre-set thresholds manually. Two kinds of sources were selected; namely in-plane source and out-plane source. The correlation between threshold levels and number of hits has been observed. It can be concluded that for both AE sources in-plane and out of plane at the lower threshold level, huge hits were produced which including unwanted hits as well as noise. At high threshold level only required data / hits were recorded by AE signals, where the data presented owing to sudden release of stress from pencil lead fracture at selected source location. Thus, it produced lower correlation between threshold levels and a total number of hits recorded as the coefficient of determination for both sources is around 0.8 only and the graph produced is not linear.