DocumentCode :
3035362
Title :
Analysis of the light dependent resistor configuration for line tracking robot application
Author :
Nasrudin, Nurfarhana ; Ilis, Nur M. ; Juin, Tan P. ; Chun, Terry Tan K ; Zhe, Loo W. ; Rokhani, Fakhrul Z.
Author_Institution :
Dept. of Comput. & Commun. Syst. Eng., Univ. Putra Malaysia, Serdang, Malaysia
fYear :
2011
fDate :
4-6 March 2011
Firstpage :
500
Lastpage :
502
Abstract :
Modern days, a robot can be designed based on human needs. In particular, the line tracking robot is a classic introductory robot design and needs minimal amount of material and cost. The aim of this project is to construct a robot that has capability to follow the white line placed on a horizontal smooth surface lighted by LED and the low cost light dependant resistor as the sensor. Rigorous analysis has been applied to determine the optimal configuration for the sensor on the mobile robot. Our findings show that angle of LDR of 30°, the distance between LDR and LED of 2.5cm and height of 2cm is the best configuration. The line tracking robot will detect the light intensity that is rebounded from the white color path.
Keywords :
light emitting diodes; mobile robots; object tracking; path planning; sensors; LED; horizontal smooth surface; human needs; light intensity detection; line tracking robot; low cost light dependant resistor configuration; mobile robot; robot design; sensor; white color path; white line path; Algorithm design and analysis; Floors; Light emitting diodes; Mobile robots; Resistors; Robot sensing systems; Light Dependant Resistor (LDR); Low Cost Sensor; PIF16F887; Stepper Motor;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Signal Processing and its Applications (CSPA), 2011 IEEE 7th International Colloquium on
Conference_Location :
Penang
Print_ISBN :
978-1-61284-414-5
Type :
conf
DOI :
10.1109/CSPA.2011.5759930
Filename :
5759930
Link To Document :
بازگشت